ntcle213e3... www.vishay.com vishay bccomponents revision: 02-feb-15 1 document number: 29154 for technical questions, contact: nlr@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ntc thermistor, epoxy coated mini sensor features ? advanced ntc technology ? temperature range from -55 c to +150 c ? highly resistant to thermal shocks ? small body diameter of max. 2.5 mm ? fast response time ? high sensitivity ? delivery in bulk or in tape with extra long leads (for automatic mounting) ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 applications temperature sensing, control and compensation. ? e.g. inlet air temperature se nsing thermistors or ect in automotive applications, sensor elements in industrial and commercial applications, he ating systems and industrial systems. mounting the thermistors are suitable for all standard assembly processes like crimping, solderin g, welding. the parameters of the assembly process should be chosen in accordance with the lead-wire material (t inned nickel) and validated in application. ? the mounting process should be in compliance with the following guidelines and recommendations: ? peeling forces on the lead s should be reduced to a minimum and should never exceed 3 n ? avoid large temperature gr adients between the welding region and the sensor packaging ? bulk components are deli vered in boxes of 500 components ? taped components are deli vered on a reel of 1500 components (according to iec 60286-2 but with extra long leads: h0 = 32 mm) design in support r(t) tables spreadsheet available on request at nlr@vishay.com or to download at: ? www.vishay.com/resistors-non-l inear/curve-computation-list note (1) replace the x-digit by j for r 25 -tolerance of 5 %, h for 3 %, g for 2 %, and f for 1 %. ? replace the y-digits by b0 fo r bulk delivery and by t1 for tape and re el delivery. quick reference data parameter value unit resistance value at 25 c 2.1k to 100k ? tolerance on r 25 -value 1 to 5 % b 25/85 -value 3511 to 4190 k tolerance on b 25/85 -value 0.5 to 1.5 % operating temperature range -55 to +150 c response time (63.2 %) 25 c to 85 c still air (for info) 5s dissipation factor ? in still air ? (for info) 1.8 mw maximum power dissipation 100 mw min. dielectric withstanding ? voltage between terminals ? and coated body 500 v ac insulation resistance at 100 v dc > 10m ? weight approx. 100 mg electrical data and ordering information vishay sap ? ordering number (1) r 25 -value (k ? ) r 25 -tol. (%) b 25/85 -value (k) b 25/85 -tol. (%) color dot (see next page) NTCLE213E3212XMYY 2.1 1, 2, 3, 5 3511 1 orange ntcle213e3103xlyy 10 1, 2, 3, 5 3435 1 red ntcle213e3103xhyy 10 1, 2, 3, 5 3984 0.5 blue ntcle213e3123xmyy 12 1, 2, 3, 5 3740 1 black ntcle213e3303xhyy 30 1, 2, 3, 5 3935 0.75 green ntcle213e3104xxyy 100 1, 2, 3, 5 4190 1.5 brown
ntcle213e3... www.vishay.com vishay bccomponents revision: 02-feb-15 2 document number: 29154 for technical questions, contact: nlr@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? non-dimensioned details do not affect the performance of the thermistors. dimensions in millimeters parameter value b 2.5 max. t 2.5 max. p 1.1 nominal p1 2.54 d 0.4 10 % h1 5.5 max. h2 10 max. l 41 1 2.5 mm max.
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
